Guardrail mounts flat (French style fixation) on a metal structure,on a wall parapet, on a concrete wall or on a concrete slab without sealing.
The floor fixture system remains the more economical solution to secure the roof deck safety.
References
Models |
Straight |
Inclined |
Curved |
Foldable |
1.Handrail |
√ |
√ |
√ |
√ |
2.Handrail+Kneerail |
√ |
√ |
√ |
√ |
3.Handrail+Kneerail+Toeboard |
√ |
√ |
√ |
√ |
4.Handrail+2*Kneerails+Toeboard |
|
√ |
√ |
|
MATERIAL
Post assemblies, hand & kneerails - profiled structural aluminium with option for powder coating
Universal elbows & end caps - die cast aluminium
DIMENSIONS
Handrail component - 40mm diameter section mounted 1000mm to 1100mm above floor surface
Kneerail component - 30mm diameter section mounted 500mm below handrail
Post component - 60mm x 25mm RHS section, post length 950mm to 1100mm above floor surface
Post spacing - max 1.5m intervals
FIXINGS
Metal fixing - M12 bolt set
Concrete fixing (min 25 MPa) - M8 x 75 screwbolt / M10 x 90 mechanical concrete anchor
Handrail to post fixing - 12-14 / 20mm set screw
Kneerail to post fixing - 12-14 / 48mm set screw
Guardrail securing:
1 / Reassemble the railing section (the butterfly will engage automatically).
2 / Then tighten the wing screw to lock all.
3 / If linked option, make sure to lock the handrails together using the connecting piece (A). To do this, unscrew the wing screw located on the blank of the part, engage the latch then screw again to lock.
Common Recommendations:
Maximum Spacing between uprights is 1.5 meters
Maximum Spacing between wall and first upright is 500mm
Maximum Height between handrail and kneerail is 500mm
Handrails and kneerails adjustable to FIT
Handrails and kneerails swaged ends and adjustable
Height parapet <=100mm minimum= compulsory Toeboard
FAQ
Q1: What's the standard length of your profiles and tube?
A: The standard length of profiles and tube are 5800mm to suit for small container, and we also can cut to specific length, however a surcharge of machining and material scrap cost will be charged accordingly based on each individual invoice.
Q2: What's your MOQ?
A: we have no MOQ for our new customers, however a surcharge of USD80 will apply for all orders less that USD 1000 for customs handing costs purpose.
Q3: what is your payment terms?
A: The payment terms we accept is T/T or irrevocable L/C at sight, T/T preferred.
Q4: What's the lead time for small order and mass production?
A: 1-3 working days for small order, and 3-10 working days for mass production of material, and the final lead time will be subject to each individual invoice.
Q5: What certification do you have?
A: We have ISO 9001:2008 certificate.