Roof Parapet Safety Railing and Guardrail

• Customization: Available
• Certification: ISO9001, RoHS, CE
• Frame Finishing: Natural Aluminum
• Model NO.: V4-Fixed guardrail
• Surface Treatment: Non
• Material: Aluminum
• Name: Parapet Fixed Guardrail
• Application: Roof Edge Fall Protection
• Field: Hardware
• Installation Situation: Flat and Low Sloped Roofs
• Type: Fully Modular System
• Upright Stype: Straight
• Min. Vertical Height: 1100mm
• OEM/Dem: Acceptable
• Quality: Verified
• Online Service: Available
• Transport Package: Carton
• Specification: Customed
• Trademark: Longdyes
• Origin: China
• HS Code: 7610900000
• Production Capacity: 15000m/Month

Product Description

Name: Parapet Fixed Guardrail and Handrail with Straight Upright

Description:
The fixed guardrail and handrail is one of the rooftop railing system, which is fixed to the roof surface or parapet wall permanently to be used at or around leading edge fall hazard areas to prevent workers from being exposed to the fall hazard itself. As the requirement, if the workers work within 15 feet of the roof unprotected edges, a permanent or temporary safety railing must be installed . If the height of a parapet wall is less than 1100mm and not tall enough to keep employees safe when working at this height, a guardrail can be fixed on the top to extend the parapet's height to make up the required distance.

Materials:
The LONGDYES parapet fixed guardrail is manufactured from the aluminum 6063 or 6061.
The materials have excellent processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, the material is dense and defect-free and easy to polish, easy to paint film, excellent oxidation effect, etc.


Application:
Fall protection for the roof top unprotected edges, ledges or roof-to-roof areas where the level drops off more than one meter. 

Feature
When collective protection is not being used, the folding uprights of this variation lie flat and are concealed when viewed from ground level, combining safety with architectural aesthetics.
Available in straight, curved or inclined styles. 


Specification:

Item	Handrail (Section)	Kneerail (Section)	Upright (Section)	Upright spacing
Dimension	Φ40mm	Φ30mm	60mm*25mm	1500mm
Mounting position	Mounted the vertical distance Min.1100mm above the roof surface	Mounted the vertical distance Max.500mm below handrail.	The vertical height Min.1100mm to the roof surface

Components' Features
The following components will be provided when the freestanding assembly is delivered:

Components	Variable Corner Bracket	Rail Junction	"D" Termination	Wall End fixing
Features	The variable corner bracket (Variable Angle Fitting) is suited for connecting two  Round Metal Handrails in variable angled applications. It is secured by using a Rail Joint/Junction at either end and should be drilled and riveted to secure in place.	The Rail Joint or Junction part is used to connect two sections of handrail or kneerail. A thrust ring located at the centre of the junction part ensures it is always installed centrally between the two joining halves.	The guardrail terminal end fixed both sides of the guardrail in order to connect the handrail to the kneerail and be joined two Rail Junctions. it should be drilled and riveted to the handrail and  kneerail to secure the fixing when the termination is posited.	It used to connect the wall end piece of Aluminum Modular Guardrail system to a fixed structure ( e.g the wall) to guarantee additional stability for the system without the need for additional counterweights on the final upright posts.

Optional item- Toeboard
If there is no parapet at the fall edge or the height of a parapet of less than 100mm, a teoboard  can be affixed to the base of the guardrail. The toeboard can prevent small objects or person slip off from the edge.


Installation steps:

1. Put horizontal bracket onto parapet then fixed it by taper screws.
2. Insert upright module into base then fix it by set screws.
3. Put handrail and kneerail onto tube fixing then fix them by tightening screws.

Test Procedure
Our freestanding guardrail would be tested according to the requirement of  EN 13374 and EN 14122-3 before the shipment.

Advantage

1. The building aesthetics can govern the installation, as can the location of any services or equipment.
2. The smooth-surfaced to protect employees from injury.
3. Completely non-penetrating of the roof.
4. Natural aluminum color, the simple and elegant appearance.
5. Fully modular system according to your needs.
6. Durable and robust, requires no maintenance.

Service:

1. OEM or DEM is available
2. Timely communication with customers, no matter on-line or by email.
3. Technical guidance for the company of professional and technical service personnel to provide customers with timely, efficient service.
4. Reasonable, timely and effective quotation is probably.
5. Sample testing is acceptable.
6. The shipment is promptly and reliably.
7. Technical and installation instructions are available after sales
8. Factory visiting is welcomed.

Package:
1. Handrail pack & Kneerail pack: 5pcs per pack, wrapped by stretch film.
2. Accessories box: Tube junction, variable corner, wall fixing, closure bends included.
3. Parapet Base pallet: Approx. 800pcs per pallet, wrapped by stretch film.
4. Upright module pallet: Approx. 552pcs per pallet, wrapped by stretch film.


Delivery:

1. 20'GP container: Capable of loading Approx.4000 meters rooftop guardrail system, in standard situation.
2. Leading time: Usually, the delivery can be made within 2-3 weeks by sea.